Tools For Unclogging A Toilet
CALL (206) 789-4944
Serving the Greater Seattle Area
For toilet clogs, there are a number of different things you can do. There are liquid and chemical products available that are supposed to clear any clog that happens. However, liquid and chemical products do not always operate how they are advertised. Toilet clogs can ruin anyone’s day, and ineffective chemical treatments only make the situation more frustrating. If the clog is very serious, you may need the services of a professional plumber. If you want to get a clog cleared as quickly as possible, there are several different tools you can use to achieve success. Always have at least one of these tools available just in case a clog occurs in your toilet.
Snake
A snake is a tool that is made out of flexible wire that is coiled together and intended to snake through the curves of a pipe. It gets deeper than most other tools and can break up any materials that are clogging the drain, making them easier to flush down the toilet. It works with a twisting motion that is controlled by the user. Twist the tool and break up whatever is causing the clog to clear out the drain and get everything back to functioning properly.
Plunger
Everyone should have a plunger nearby to deal with toilet clogs. While they may not be as effective as other serious tools, a plunger is the most common toilet clog cure for a reason. Make sure the plunger you have is a good fit for your toilet, as it should create a tight seal that does not allow any air to pass through. The larger the plunger is, the more force you can use to clear the clog. If the plunger is made to fit your toilet, but the seal is still not as strong as it could be, run the plunger under some hot water to soften it up. This will help the plunger create an airtight seal that will work better for you.
Wire Hanger
If the clog is shallow enough, you may not need a snake to get to it. A wire hanger can be just as effective as a snake if the clog is in the first few inches of the toilet drain. Straighten out the wire hanger so it forms one long piece of wire, then tightly wrap one end of it with a rag. Once the wire is ready, insert it into the toilet and twist it around to clear the clog from the drain. It may take a little bit of time, but the clog should clear without too much trouble.
CALL (206) 789-4944
Serving the Greater Seattle Area